Cobra Electronics AN - 8630 - 25 manual Rechargeable Battery Information

Models: AN - 8630 - 25

1 16
Download 16 pages 26.87 Kb
Page 13
Image 13

RECHARGEABLE BATTERY INFORMATION

Your Cobra Intenna Cordless Telephone Answering System comes complete with a rechargeable nickel-cadmium battery already in the handset. You will need to charge the battery by plugging in the base, placing the handset in the base and letting it charge overnight (at least 12 hours).

Battery Recharging

There are three things that can happen to indicate that your handset battery needs recharging. When one of these three things occurs, you will need to return the handset to the base and recharge for at least 12

Replacing The Battery

Your phone uses a Ni-Cad battery which can lose its ability to take a charge after several hundred hours of use. If you notice a shorter talk time after charging, your battery may need replacing.

If you have recharged the battery for 12 hours or more and the handset does not work when the TALK button is pressed, you may need to replace the battery. To order a new battery, call Cobra toll-free at 1-773- 889-3087, or remove it from the handset and take it to a local hardware store or home center store to be certain that you are getting the proper replacement battery.

To Dispose Of Your Battery

The rechargeable nickel-cadmium (NiCad) battery in this product must be recycled or disposed of properly in compliance with all applicable laws. Certain states or municipalities require recycling and have established collection programs. Please contact your local waste removal authority for instruction or return to Cobra for recycling. Wrap carefully and mail postage prepaid to:

continuous hours.

1. The TALK Button on the handset

flashes.

1

BATTERY

To Remove/Replace

The Handset Battery

1. To remove the battery door, press and

COBRA ELECTRONICS

CORPORATION

6500 W. Cortland Street

Cobra®

2. A 2-beep warning sounds while you

are using the phone. This indicates that

you have just a few minutes of power

left to complete your conversation

before the phone disconnects.

3. The handset beeps at 30 second

intervals for five minutes when it has

been away from the base too long.

After five minutes, it will not flash or

beep, nor will you be able to get a dial

tone. Return the handset to the base

for recharging.

NOTE: To prevent your batteries from running out of power, Cobra suggests that you leave the handset in the base as much as possible when not in use. The CHARGE indicator will remain on as long as the handset is in the base, even after the batteries are fully recharged. This will not damage the batteries.

DOOR ON

slide downward.

HANDSET

2. Carefully disconnect the battery pack

 

 

and dispose of it properly. See

 

BATTERY DISPOSAL below.

 

3. To replace, connect the new battery

 

and replace the door. Return the

 

handset to the base and charge the

 

battery overnight (at least 12 hours).

To Clean The

Charging Contacts

The two metal charging contacts on both the handset and the base should be cleaned regularly with a soft, dry cloth for optimum recharging performance.

Chicago, Il. 60707

Attn: Battery Recycling

Do not put batteries into fire or expose to high heat. They may explode.

“Contains Nickel-Cadmium rechargeable batteries. Must be recycled or disposed of properly”.

RBRC

RBRC

Ni-Cd

2

AN8630-25

NEED HELP? 1-773-889-3087

Page 13
Image 13
Cobra Electronics AN - 8630 - 25 manual Rechargeable Battery Information