Standby/Receive Transmit | Cobra Electronics MRHH325VP instruction

Operating Your Radio

Call Tone Mode

Setup Mode Programming

Call Tone Mode

In Call Tone mode, your radio can alert you to incoming signals by sounding an audible call tone, a silent vibration or both. This setting will also allow you to transmit a unique Call Tone alert to identify your radio when you transmit messages. You can select from one of 10 different Call Tone signals.

To Set Call Tone:

1.From the previous press of the Call/Enter/Setup button, the LCD will display the letter “C” and the current Call Tone number (01 through 10).

2.Press the Channel Up/Down button to select a different Call Tone. An example of each call tone will sound for 1.5 seconds.

3.Press Call/Enter/Setup button to save this entry and move to the next setup programming mode.

NOTE

Call Tones are not usually used for Marine VHF communications. We allow you to turn it On for your unique communication needs.

Operating Your Radio

Roger Beep Mode

Key Tone Mode

Standby/Receive

and Transmit

Roger Beep Mode

In Roger Beep mode, your listener will hear an audible tone when you release the Talk button. This alerts your listener that you are finished talking and it is OK for them to speak.

To Set Roger Beep On or Off:

1.Display will show ROG icon and ON or OFF flashing.

2.Press Channel Up/Down button to select ON or OFF. ROG will be displayed when On.

3.Press Call/Enter/Setup button to save this entry and move to the next setup programming mode.

Key Tone Mode

In Key Tone mode, an audible tone will sound each time a button is pressed or you change a setting.

To Set Key Tone On or Off:

1.Display will show Key Tone icon and ON or OFF flashing.

2.Press Channel Up/Down button to select ON or OFF.

3.Press Call/Enter/Setup button to save entry.

You have now ended Marine (VHF) Setup programming mode and will enter Marine Standby mode.


44 English		Nothing Comes Close to a Cobra® 45

Image 26

Cobra Electronics MRHH325VP owner manual Standby/Receive Transmit, Call Tone Mode, Roger Beep Mode, Key Tone Mode

Contents

For Assistance Outside the U.S.A Our Thanks to You Customer AssistanceCustomer Assistance For Assistance in the U.S.A Product Features Radio Controls IndicatorsBacklit LCD Screen Product Features Backlit LCD Liquid Crystal Display Screen Speaker/Mic Jack Signal Strength MeterEmergency Weather Alert Unlimited Memory Channels Roger Beep Tone Selectable Table of Contents Important Safety Information Important Safety InformationSafety Training Information Recommendations for Marine Communication Recommendations for Marine Communication FCC Licensing Information VHF Marine Radio Procedures Voice Calling Voice CallingVoice Calling Vessel Corsair is calling the vessel Vagabond Radiotelephone Calls Emergency Messages Distress ProcedureEmergency Messages and Distress Procedure Radiotelephone Calls If You Hear a Distress Call Marine Emergency SignalsMarine Distress Procedure Emergency Messages and Distress Procedure VHF Marine Channel Assignments 03A Government Only International Distress, Safety and CallingVHF Marine Channel Assignments 23A Government Only 20A Port Operations Port Operations, Ship Movement21A U.S. Government Only Canada Coast Guard Only 64A U.S. Government Only Canada Commercial Fishing Digital Selective Calling Voice communications not allowed 81A U.S. Government Only Environmental Protection Operations Noaa Test Alert System Noaa Weather Channels AlertNoaa Emergency Weather Alert Weather Frequency/Channel Belt Clip Included in this PackageAntenna, Wrist Strap Batteries and Charger Batteries and ChargerInitial Charge Maintaining the Battery Charge Alkaline Batteries Common Radio Functions Power/Volume/Squelch Controls Power On/Off ControlGetting Started Getting Started Backlight/Key Lock Button Scan Button High/Medium/Low H-M-L Power Button Setup Mode ProgrammingSetup Mode Programming To Toggle Between H-M-L Power Modes To Set Channel Map Operating Area VibrAlert ModeUSA/International/Canada Channel Maps To set VibrAlert Key Tone Mode Call Tone ModeRoger Beep Mode Standby/Receive Transmit To Set WX Alert On or Off Marine Standby and Receive Rx ModeStandby/Receive and Transmit To Set WX Auto Search Scan On or Off WX Alert Standby Mode Transmit Tx ModeWeather WX Standby Mode To Transmit a Message Advanced Operation Channel 16/9 ModeAdvanced Operation Using Tri-Watch Tri-Watch Scan Mode Tri-Watch ModeTri-Watch Setup To Program or Edit the Tri-Watch Channels Advanced Operation To Program Memory Locations Memory Location ModeTo Exit Memory Location Mode To Recall a Stored Memory Location Memory Location Scan Mode Product FeaturesChannel Scan Mode To Enter Channel Scan Troubleshooting Maintenance TroubleshootingMaintenance For Products Purchased In The U.S.A Warranty and Trademark Specifications AcknowledgementSpecifications Limited 3-Year Warranty For Products Purchased Outside The U.S.A Accessories Product ServiceAccessories