Operation continued.

Match Lighting Instructions for LIGHT

1. Turn cylinder valve on.

 

2. Remove front glass.

 

 

 

 

 

 

3.Place a lighted match near mantle, then push in and rotate Light Control Knob to the ON position. Immediately light second mantle with match.

Note: If BOTH mantles are not lighted within 5 seconds, turn Light control knob to OFF position. All controls should be turned to the OFF position and a period of at least 5 minutes should pass before reattempting to light mantles.

4. Carefully replace front glass.

12

Shut Down Procedure

HEATER

LIGHT

1. Rotate Heater control knob

1. Push in and rotate Light control

(clockwise) to pilot position.

knob (clockwise) to OFF position.

2.Push in on Heater control knob and rotate (clockwise) to OFF posi- tion.

The gas supply must be turned off at the LP-gas cylinder when this appliance is not in use.

Storage

Disconnect heater from propane tank before long term storage of either the cylinder or the Heater.

1.Turn cylinder valve off.

2.Disconnect regulator from cylinder.

3.Remove tank from Heater.

4.Store propane tank in safe manner. Refer to Chapter 5 of Standard for Storage and Handling of Liquefied Gases, ANSI/NFPA 58. Follow all local codes. Always store propane tanks outdoors.

5.Store heater in a dry, clean, and safe place.

WARNING

•BURN HAZARD

•Do not touch or attempt any maintenance on Heater for at least 1 hour after use.

•Make sure all controls are off and propane tank has been removed before doing maintenance.

Maintenance

To enjoy years of outstanding performance from your Heater perform the following maintenance activities on a regular basis:

•Keep exterior surfaces clean.

•Use warm soapy water for cleaning. Never use flammable or cor- rosive cleaning agents. For stainless steel surfaces, use a stain- less steel cleaner available at most retail stores.

•While cleaning your unit, be sure to keep the area around the burner, pilot assembly and mantle area dry at all times. If the reg- ulator is exposed to water in any way, do NOT try to use it. It must be replaced.

•Air flow must be unobstructed. Keep controls, burner, and circu- lating air passages clean. Signs of possible blockage include:

•Gas odor with extreme yellow tipping of flame.

•Heater does NOT reach the desired temperature.

•Heater glow is excessively uneven.

•Heater makes popping noises.

•Light is uneven or burns with a yellow smokey flame.

•Spiders and insects can nest in burner orifices. This condition can damage heater and render it unsafe for use. Clean burner holes by using a heavy-duty pipe cleaner. Compressed air may help clear away small particles.

•Carbon deposits may create a fire hazard. Clean light and burner with warm soapy water if any carbon deposits develop.

•NOTE: In a salt-air environment (such as near an ocean), corro- sion occurs more quickly than normal. Frequently check for corrod- ed areas and repair them promptly.

Page 11 Page 13
Page 12
Image 12
Coleman 5040B747, 5040-761 manual Shut Down Procedure, Storage, Maintenance, Match Lighting Instructions for Light
Page 11 Page 13

5040-761, 5040B747 specifications

The Coleman 5040B747 and the Coleman 5040-761 are two remarkable models in Coleman’s expansive lineup of camping gear, known for their sturdy design and user-friendly features. Designed to enhance outdoor experiences, these products offer a perfect combination of functionality and convenience for campers and adventurers alike.

One of the standout features of the Coleman 5040B747 is its spacious sleeping capacity. Accommodating up to eight campers, this tent is ideal for families or groups, providing ample room for multiple sleeping arrangements. The tent is engineered with a cabin-like design, enabling users to stand up and move around comfortably inside. This makes it easier to organize gear and settle in after a long day outdoors.

In terms of weather resistance, both models utilize Coleman's advanced WeatherTec system, which includes patented welded floors and inverted seams. This construction significantly reduces the risk of water ingress, ensuring a dry and comfortable interior even during inclement weather. Additional features such as large windows and a ground vent provide optimal airflow, facilitating a cooler and more comfortable environment inside the tent.

The Coleman 5040B747 and 5040-761 models also emphasize ease of setup. With color-coded poles and continuous pole sleeves, the assembly is straightforward, allowing for quick setup in under twenty minutes. This is a crucial characteristic for campers who want to spend less time wrestling with gear and more time enjoying outdoor activities.

For added convenience, both tents come with built-in storage pockets and a gear loft, providing easy access to personal items and ensuring that the interior remains uncluttered. The inclusion of a rainfly further enhances weather protection, while also offering a versatile living space for those who prefer a more open view of the stars at night.

In conclusion, the Coleman 5040B747 and 5040-761 tents exemplify robust design, user-friendly features, and a commitment to quality that exists throughout the Coleman brand. Their spacious interiors, weather-resistant technology, and efficient setup process make them excellent choices for anyone looking to enjoy the great outdoors with comfort and ease. Whether you're an experienced camper or a beginner, these tents are designed to meet your needs, ensuring your camping experience is both enjoyable and memorable. With Coleman, adventurers can explore the beauty of nature without compromising on comfort.
Top Page Image Contents