Assembly continued.
Step 3 (continued) |
|
|
| ||
■ Attach the second Side Support |
| ■ Attach one large screw loosely | |||
Bracket loosely with Hex Nut at |
| at base of the second Side | |||
top. |
| Support Bracket. | |||
|
| 1 Req’d |
|
| 1 Required |
|
|
|
| ||
|
|
|
|
| |
|
|
|
|
| |
| Hex Nut |
|
| Large Screw | |
|
|
|
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Step 4
■Set cylinder cover assembly on
top of heater base. Position opening opposite the wheels.
Step 4 (continued)
■Attach Cylinder Cover Pieces to Base with two large screws horizon- tally into the Base Tabs.
2 Required
Large Screw
■Attach three Support Brackets to Base with three large screws down- ward through Support Brackets into the Base.
3 Required
Large Screw
Step 5
■Tighten all fasteners. Use a #2 Phillips screwdriver to tighten all screws. Use a 7/16" open end wrench to tighten all hex nuts.
5
