Coleman 5100 LP, 5110 manual 20-A, 20-B, 20-C

NOTE: Step 20 applies to you only if your grill is set up from the factory to use LP GAS. If your grill is set up from the factory to use NATURAL GAS, skip to Step 21.

Ö Attach an LP Cylinder to the Grill.

Step

20

20-A

LP Cylinder

Cylinder Support

20-A. Set LP Cylinder in the Cylinder Support with the outlet valve facing toward the front of the grill.

20-B

Cylinder Hold-Down Bolt

20-B. Tighten the Cylinder Hold-Down Bolt against the bottom cylinder collar.

20-C

Type 1 Nipple

Fuel Valve Outlet

20-C. Insert the TYPE 1 Nipple of the regulator into the cylin- der’s Fuel Valve Outlet as shown. Turn the regulator hand wheel clockwise to tighten. No tools are needed. The hand wheel will come to a complete stop when the connection is secure, and gas will not flow until a positive seal is achieved.

IMPORTANT!

TO ENSURE PROPER GAS FLOW, BURNER

CONTROL VALVES MUST BE “OFF” BEFORE

OPENING THE GAS CYLINDER VALVE.

WARNING: During assembly of grill and when attaching or replacing the L.P. gas cylinder, insure that the gas sup- ply hose is free of kinks and/or damage and is at least 3” away from hot surfaces such as the grill casting.

24