ÖÖAssemble the Electrode
Wires and the Battery to the
Electrode Module.
Note: The fuel hoses are not
shown in this step, for
simplicity.
16-A
Side Burner Wire
9-Volt Battery
Top Burner Wires
Electrode Module
16-A. Slip the Top Burner Wires through the
large hole in the Top Panel.
ÖÖSlip the Side Burner Wire through the
large hole in the Left Panel.
ÖÖAssemble the 9-Volt Battery to the
Electrode Module.
Note: The polarity is marked on the Electrode
Module.
Step
16
21
16-B Electrode Module
Igniter Button Wires
(Note: Large Tabs)
9-Volt Battery
Side Burner
Electrode Wire
TEST THE IGNITER:
A SPARK SHOULD APPEAR AT
ELECTRODE TIP.
IF THE SPARK DOES NOT
APPEAR:
-CHECK THE WIRE
CONNECTIONS TO THE
MODULE.
-CHECK PROPER
ASSEMBLY OF FRESH
9-VOLT BATTERY.