Gilson 402 manual Error Messages, Appendix D

Error Messages Appendix D

Error Messages

	Error Messages
Error Message	Cause/Possible Action
Adjust volume too small	In DISPENSE, you have, you have entered a value for “Final
	vol.” that is too small.
	“Final vol.” > volume of biggest fraction dispensed.
Asp flow missing	Re-enter Method, supplying the missing parameter, when
	prompted to do so (see DILUTE, DISPENSE, PIPETTE, and
	MIX tasks).
Diluent volume missing	Re-enter Method, supplying the missing parameter, when
	prompted to do so (see DILUTE task).
Disp flow missing	Re-enter Method, supplying the missing parameter, when
	prompted to do so (see DILUTE, DISPENSE, PIPETTE, and
	MIX tasks).
DISP task in wrong place	Within a Method, DISPENSE must follow DILUTE or MIX.
	To DISPENSE before DILUTE you should create a Method file
	containing only the DISPENSE task.
Incorrect flow rates	Use flow rates that correspond to the configured syringe
	size(s); refer to page 5-31.
Left syr life exhausted!	For the Dual-syringe model: piston of left-hand syringe may
	need replacing.
LINK method not allowed!	You can’t link files that are already linked.
Max sample vol. reached	In DILUTE UNKNOWN, you need a larger syringe/transfer-
	tubing to measure volumes greater than the maximum
	reached with the existing configuration.
Mechanical problem: Help	Occurs when the valve or a syringe jams; switch off and
	correct the problem:
	the syringe and/or valve need servicing (clean or change).
Method does not exist!	First, you must create the Method to be linked, then enter its
	file number using LINK.
Method used in link file	You have attempted to delete a Method number that has been
	assigned in LINK. You must delete the file containing LINK,
	before deleting the Method.
Method xxx is locked	Unlock Method file, to continue with this action.
Mix volume is missing	Re-enter Method, supplying the missing parameter, when
	prompted to do so (see MIX task).
Nb mixes is missing	Re-enter Method, supplying the missing parameter, when
	prompted to do so (see MIX task).
No room to copy meth xxx	You need to free up space by deleting one or more Methods.
Not enough memory!	Reduce the size and/or number of stored Method files.

Appendix D-2