Gilson 402 manual Entering the Configuration CONF, Tubing Volume Screen, Operation - Advanced Use

Operation - Advanced Use 5

Software

4 Press the Next soft-key to go to the following screen.

5 Press the Chge soft-key to choose an option or to select from a list of possible values.

6 Press the ESC key to return to the level of the previous screen or menu.

7 Press CLEAR to remove the value (before pressing ENTER) and return to the previous value.

8 Press Deflt to select the default value or option.

		Entering the Configuration (CONF)
Configuration Screen		You have to tell the controlling software how your
		402 Dilutor-Dispenser is configured (syringe sizes,
		flow rates, etc.). Press the CONF key; you see the
		Configuration Screen.
	Press Key To Change		What Items
	Vol	Volumes	Transfer Tubing, Air Gap.
	Syr	Syringe	Sizes, Correction, and to change.
	Flow	Flow-rates	Air, Prime, Reservoir.
	Count	Counters	Number of cycles for syringe(s) and valve.
	Etc	Switch On/Off	Beeper and Autorefill function.
Tubing Volume Screen		Volume(s)

Press the Vol soft-key, you see the Tubing Volume Screen.

The use of the soft-keys is as follows:

Next is used to go to the next screen (from Tubing Volume Screen),

Chge is used to select the tubing size,

Prev is used to go to the previous screen (from Air Gap Volume Screen),

Check that the configured volume for the probe tubing is the same as the size fitted. For the standard probe, you can select from: 1, 2, 5, 10 mL (tapered tubing).

When using disposable tips, you must select the size of tip (Micro or Large Volume), and application type for Micro Tips only (Air or Liquid). When you use disposable tips, the ‘Extra Volume’ parameter is automatically changed to ‘Air Push Volume’.

5-6