Gilson 402 manual Other Items, Resv Flow Screen Prime Flow Screen Beeper Screen Autorefill Screen

Operation - Standard Use 4

Essential Steps

Resv Flow Screen

Prime Flow Screen

Beeper Screen

Autorefill Screen

Start-up Screen

Next is used to go to the next screen (see Air Flow Screen),

Prev is used to go to the previous screen (see Resv flow Screen).

Air Flow is the rate in mL/min. that air is drawn into the transfer tubing when aspirating air.

Key in the required value, then press ENTER. Press the ESC key to return to the Configuration Screen or press Next to go to the Resv Flow Screen.

Resv (Reservoir) Flow is the rate in mL/min. that solvent is aspirated from the reservoir by the left syringe.

Key in the required value, then press ENTER. Press the ESC key to return to the Configuration Screen or press Next to go to the Prime Flow Screen.

Prime Flow is the rate in mL/min. that liquid is transferred by either syringe when priming.

Key in the required value, then press ENTER. Press the ESC key to return to the Configuration Screen.

Other Items

Press the Etc soft-key; the Beeper Screen appears. This is to set an alarm when an error occurs, and to warn that liquid is going to be dispensed to waste.

To switch between ON and OFF, press the Chge soft-key, then press ENTER to confirm.

Press Next to go to the Autorefill Screen. Press the ESC key to return to the Configuration Screen.

When you set Autorefill to ON, the left-hand syringe re-aspirates diluent automatically for the next cycle, while you are (for example) aspirating air via the probe. This feature enables you to work faster with the 402.

To switch between ON and OFF, press the Chge soft-key, then press ENTER to confirm. Press Prev to go to the Beeper Screen. Press the ESC key to return to the Configuration Screen.

This completes the basic configuration process, press ESC to return to the Start-up Screen.

4-6