Coleman 7700 Series Hardware shown actual size, Right Base, Grill Label, Center Base, Left Base

Step

1

ÖNOTE: Use a large piece of cardboard or a ground cloth to protect the painted finish on the grill.

ÖNOTE: The base pieces are assembled up-side- down in this step.

Hardware shown actual size

(TN)

M6 x 15mm Screw

(8) Qty.

TN

1-A

Right Base

Grill Label

Center Base

TN (x8)

Left Base

1-A. Arrange the three base pieces on the ground as shown.

ÖAssemble the Right Base and the Left Base to the Center Base using two screws (TN) in each corner.

1-B

ÖNote: Arrange the Center Base so the Grill Label is positioned as shown.

Locking

Casters

Front

Non-

Locking

Casters

1-B. Fasten Casters tight against the Caster Brackets.

8