35
Storage Of Lower Anchor Belt And Connectors:
When not using the LATCH System, store the lower anchor belt and connectors by snapping the connectors onto LATCH connector storage rings located on the back side of the
seat pad (fig. l). Pull on free end of lower anchor belt to tighten.
NOTE: To prevent damage to the seat pad, care should be taken when removing or securing connectors. Excessive force could damage or tear seat pad.
(fig. l)
LATCH
Connector
Storage Ring
Section 9b - Forward-facing Installation
With Vehicle Seat Belt
WARNING
DEATH or SERIOUS INJURY can occur
•Not all vehicle seat belts can be used with this car seat. Read vehicle owner’s manual and “Vehicle Seat Belts” section in this manual.
•Vehicle seat belt MUST stay tightly adjusted around car seat at all times. If vehicle seat belt does not stay tight, read the vehicle owner’s manual and “Vehicle Seat Belts” section in this manual.
1Refer to vehicle owner’s manual to identify the seating locations which can be used with a car seat. Check for specific instructions for car seat use.
2After selecting a seating location, if adjustable, adjust vehicle seat back into most upright position.
3Rotate car seat on lower base to
4Place car seat
36