Combi 8100 instruction manual Fig. j

39

12Check for secure installation. Gripping car seat at top of armrest, pull car seat front to back and

left to right to check for secure installation (fig. g). Vehicle lap belt MUST stay tight.

If the vehicle lap belt does not stay tight or
car seat can not be securely installed, check
that arrow on belt lock-off is pointing toward	(fig. g)
buckle, see vehicle owner’s manual , “Vehicle
Seat Belts” section or move to a different
seating location.

13Attach top tether hook (A) to vehicle top tether anchor hardware (B) (fig. h) and pull strap to tighten top tether removing any slack.

If top tether anchor (B) is not available in vehicle, see vehicle owner’s manual or

Top Tether Information in “Selecting A vehicle Seating Location” section.

Pull to tighten

(A)

(B) (fig. h)

Removal Of Car Seat Installed With Vehicle Seat Belt:

1 Tip belt adjuster to loosen top tether strap	Belt
(fig. i).	Adjuster
2 Depress retainer spring 1 and unhook 2
tether hook from vehicle top tether anchor
(fig. j).

3Unbuckle vehicle seat belt.

-Pressing down in center of car seat to reduce tension on vehicle seat belt will make it easier to loosen vehicle seat belt.

4Open belt lock-off and remove vehicle seat belt from belt path.

(fig. i)

Tether

Hook

2

Retainer

Spring 1

(fig. j)

40