43

4Place harness straps over child’s shoulders and thighs.

For information on harness operation and use, see “Harness Use and Adjustment” section.

5Buckle Harness:

-Place top of buckle tongues together and insert buckle tongues into buckle (fig. b). You should hear a click.

-Pull up on tongues to be sure they are locked.

6Pull harness adjuster strap (fig. c) to snugly adjust harness straps.

Click

(fig. b)

-Check that harness straps are snug on shoulder and thighs. Straps should not allow a finger to pass between the belt and the child’s shoulder.

-A snug harness strap should not allow any slack. It lies in a relatively straight line without sagging. It does not press on the child’s flesh or push the child’s body into an unnatural position.

NOTE: If harness can not be snugly adjusted as described above, do not use this car seat.

Harness

Adjuster Pull

Strap

(fig. c)

7Close chest clip and position chest clip at arm pit level (fig. d).

Chest Clip

Small infants:

For a small infant, a rolled towel can be used on each side for support (fig. d). Towels MUST not interfere with the ability to snugly adjust the harness system. DO NOT place towel or

other items behind infant or between infant and harness.

Rolled Towel

(fig. d)

44

Page 23
Image 23
Combi 8100 instruction manual Click