3-24 Installing Hardware Options
Writer: Michele Wray Project: Compaq ProLiant 1850R Setup and Installation Guide Comments: 333172- 002
File Name: D-CH03.DOC Last Saved On: 1/29/99 8:15 AM
COMPAQ CONFIDENTIAL - NEED TO KNOW REQUIRED
Figure 3-25. Installing the CD-ROM from the chassis

Attaching Mass Storage Devices

Bays A and B can accomodate two half-height or one full height device(s).
Devices that can be installed include: an additional CD-ROM drive, 1-inch or
1.6-inch height hard drives, SLR, DAT, or DLT tape dr ives.
Installing External Storage Devices
Optional mass storage devices can be connected to the Compaq ProLi ant 1850R
server by using the external Wide-Ultra SCSI-3 port on the back of the unit.
Installing a 3.5-Inch Drive intoa 5.25-Inch Drive Bay
To install a 3.5-inch drive into a 5.25-inch drive bay (Bay A or Bay B):
1. If the server is on, place it in Standby and disconnect the power cord-(s).
See to Chapter 2, “Server Installation Overview”.
2. Pull the server forward in the rack for access to the inside of the server.
3. Remove the server cover.