5-16 Server Configuration and Utilities
The third method would be very similar to the “Manual Path” listed
above however you run the Compaq’s System Configuration Utility to configure the system, obtain the appropriate EFS for the SCO operating system release and follow the manufacturer’s installation instructions. Once again, depending on the operating system, it may be necessary to use the Compaq Boot Time Loadable Drivers (BTLD) diskette or the Compaq Host Bus Adapters (HBA) diskette along with the Compaq Extended Feature Supplement (EFS) diskette to install all the driver support. These can be downloaded onto floppies with tools available on the Compaq SmartStart and Support Software CD. To create these floppies, boot the Compaq SmartStart and Support Software CD and follow the instructions to create Supplemental Support Software diskettes. One of the diskettes on the Compaq EFS contains a bootable documentation diskette. Before attempting to install the SCO UNIX software, boot this diskette and read the README file for the Compaq EFS. It will instruct you on how to use the BTLD or HBA diskettes along with the SCO installation media.
Compaq specific drivers either included with the EFS or packaged with SCO’s media include:
Compaq Ethernet/Token Ring Adapter
Automatic Server
Compaq System Health
Compaq ProLiant Storage System
Compaq SCSI and Intelligent Disk Array
Compaq Fiber Storage Array Support
Compaq Remote Insight Board Support
Compaq System Utilities
Special Considerations
Please check the “README" files on the Compaq SmartStart or EFS Diskettes or CDs for additional details.
