Using the CD or DVD Drive
Manually Ejecting a Disc
SDid you know... If your Notebook power is off, you will not be able to eject a disc from the CD or DVD drive. To remove a disc without powering up your Notebook, you must eject the disc from the drive manually.
If you need to eject a disc when the power is off, complete the following steps to eject the disc manually:
1.Make sure the power is off and any external power sources are disconnected.
cad goes here
2.Insert a small rod or pin, such as a paper clip (approximately 1/16 inch in diameter and at least 3/8 inch in length) into the Manual Eject Hole and push firmly as shown in the preceding figure.
3.Remove the disc from the tray.
4.Gently push the tray back into the drive until it locks into place.
Mobile Internet PC User’s Guide |
Presario 2700 Series
