Removal and Replacement Procedures

2.Turn the system board bottom side up with the rear panel facing you.

3.Insert the tip of a flat-blade screwdriver into the slot on the processor locking screw.

4.Turn the screwdriver counterclockwise 1 to release the processor (Figure 5-34).

5.Remove the processor from the socket on the system board 2.

When installing the processor, make sure the gold triangle 3 is in the lower right corner.

Figure 5-34. Removing the Processor

Reverse the preceding procedure to replace the processor.

Maintenance and Service Guide

5–51

Page 159
Image 159
Compaq 279362-002 manual Reverse the preceding procedure to replace the processor