Compaq 279362-002 manual Removal and Replacement Procedures

Removal and Replacement Procedures

✎Steps 3 through 5 apply only to Evo Notebook N600c models.

3.Remove the tape that secures the modem cable to the system board 1 (Figure 5-22).

4.Remove the two 7.0-mm bushing guides 2 on either side of the docking connector that secure the system board to the base enclosure.

5.Remove the three TM2.5 × 5.0 screws 3 that secure the system board to the base enclosure.

Figure 5-22. Removing the System Board Screws and Bushing Guides on an Evo Notebook N600c

5–36 Maintenance and Service Guide