Removal and Replacement Procedures

4.Turn the notebook top side up with the front facing you.

5.For Evo Notebook N620c and N610c models

only—Remove the two TM2.0 × 4.0 1 screws that secure the top cover to the base enclosure (Figure 5-21).

6.For all notebook models—Remove the TM2.5 × 7.0 2 screw that secures the top cover to the base enclosure.

7.Insert a flat blade screwdriver into the slot 3 on the rear edge of the top cover to disengage the cover from the I/O bracket.

8.Lift the top cover straight up and remove it from the base enclosure 4.

Figure 5-21. Removing the Top Cover

Reverse the preceding procedure to replace the top cover.

5–34

Maintenance and Service Guide

Page 142
Image 142
Compaq 279362-002 manual For Evo Notebook N620c and N610c models