Compaq 279362-002 manual Reverse the preceding procedure to replace the system board

Removal and Replacement Procedures

✎Figure 5-27 applies only to Evo Notebook N620c and N610c models. When handling the system board, be careful not to put stress on the I/O interface board 1. The narrow profile of this board makes it susceptible to being damaged when mishandled. The system board should only be removed and handled using the Media Bay connector 2. After the system board is installed in the base enclosure, apply gentle downward pressure on the I/O interface board directly above the two connectors 3 and 4 that connect the I/O interface board to the system board.

Figure 5-27. Proper Handling of the I/O Interface Board on Evo Notebook N620c and N610c Models

Reverse the preceding procedure to replace the system board.

Maintenance and Service Guide 5–41