Removal and Replacement Procedures

5.Position the notebook so the rear panel is facing you.

6.Remove the four TM2.5 × 7.0 screws 1 that secure the left and right hinge covers to the base enclosure (Figure 5-21).

7.Remove the left 2 and right 3 hinge covers by sliding them toward the outside of the notebook.

✎The hinge covers are included in the Miscellaneous Plastics/Hardware Kit, spare part number 310359-001.

8.Lift the display straight up 4 to remove it from the notebook.

Figure 5-21. Removing the Display Assembly

Reverse the preceding procedure to install the display assembly.

5–26

Maintenance and Service Guide