Product Description

2.Remove the real time clock (RTC) battery (refer to Section 5.16, “RTC Battery”).

3.Wait approximately five minutes.

4.Replace the RTC battery and reassemble the notebook.

5.Connect AC power to the notebook. Do not reinsert any battery packs at this time.

6.Turn on the notebook.

All passwords and all CMOS settings have been cleared.

1.4 Power Management

The notebook comes with power management features that extend battery operating time and conserve power. The notebook supports the following power management features:

Standby

Hibernation

Setting customization by the user

Hotkeys for setting level of performance

Battery calibration

Lid switch Standby/resume

Power/Standby button

Advanced Configuration and Power Management (ACP) compliance

Maintenance and Service Guide

1–13