Removal and Replacement Procedures

2.Remove the tape 1 that secures the modem board cable to the system board (Figure 5-27).

3.Disconnect the modem board cable from the system board 2.

4.Remove the two PM2.0 × 4.5 screws 3 that secure the modem board to the system board.

5.Remove the modem board 4 from the system board.

Figure 5-27. Removing the Modem Board

✎The modem cable is included in the Miscellaneous Plastics/Hardware Kit, spare part number 310359-001.

Reverse the preceding procedure to install the modem board.

Maintenance and Service Guide

5–35