![](/images/new-backgrounds/1116803/11680351x1.webp)
BIOS
Boot Up Floppy Seek: During
80 tracks.
Disabled: The BIOS will not search for the type of floppy disk drive by track number.
Note: BIOS can not tell the difference between 720K, 1.2MB and 1.44MB drive types as they are all 80 tracks.
Boot Up NumLock Status: This controls the state of the NumLock key when the system boots. The default is On.
On: The keypad acts as a
Off: The keypad acts like the cursor keys.
Gate A20 Option: This refers to the way the system addresses memory above 1MB (extended memory). The default is Fast.
Normal: The A20 signal is controlled by the keyboard controller or chipset hardware.
Fast: The A20 signal is controlled by Port 92 or chipset specific method.
Typematic Rate Setting: This determines the keystrokes repeat rate. The default is Disabled.
Enabled: Allows typematic rate and typematic delay programming.
Disabled: The typematic rate and typematic delay will be controlled by the keyboard controller in your system.
Typematic Rate (Chars/Sec): This is the number of characters that will be repeated by a keyboard press. The default is 6.
6: 6 characters per second.
10: 10 characters per second.
15: 15 characters per second.
24: 24 characters per second.
8: 8 characters per second.
12: 12 characters per second.
20: 20 characters per second.
30: 30 characters per second.
Typematic Delay (msec): This setting controls the time between the first and the second character displayed by typematic
Page