![](/images/new-backgrounds/1116803/116803123x1.webp)
| Appendix |
|
|
|
|
| data space has been satisfied will be distributed between the |
| destination partitions in proportion to the data usage in the |
| source partitions Someexamples follow that will help |
| illustrate: |
flag Exit. Normally when Ghost has finished copying a new | |
| system to a disk, it prompts the user to reboot with a press |
| |
| run as part of a batch file it is sometimes useful to have it |
| just exist back to the DOS prompt after completion so that |
| further batch commands may be processed. |
| this. See |
Image All. The Image All switch forces Ghost to do a | |
| sector by sector copy of all partitions. When copying a |
| partition from a disk to an image file or to another disk, |
| Ghost examines the source partition and decides whether to |
| copy just the files and directory structure, or to do an |
| image (sector by sector) copy. If it understands the internal |
| format of the partition it defaults to copying the files and |
| directory structure. Generally this is the best option, but |
| occasionally if a disk has been set up with special hidden |
| security files that are in specific positions on the partition , |
| the only way to reproduce them accurately on the target |
| partition is via an image or |
enables spanning across volumes. | |
splits image file into ‘x’ Mb? Mb spans. Use this to create a | |
| ‘forced’ size volume set. For example, if you would like to |
| force smaller image files from a 1024 Megabyte drive, you |
| could specify 200 megabyte segments.For example, ghost. |
| exe |
| segments. |
use the | |
| being prompted with the final ‘Proceed with disk clone |
| destination drive will be overwritten?’ question. This |
| command is useful in batch mode. |
|
|
|