BIOS
4-4 Power Management Setup
Choose the “POWER MANAGEMENT SETUP” in the CMOS SETUP UTILITY to display the following screen. This menu allows the user to modify the power management parameters and IRQ signals. In general, these parameters should not be changed unless it’s absolutely necessary.
Figure 5: Power Management Setup
ACPI Function: This option allows you to select ACPI Function. The default is Enabled.
Enabled: Support ACPI function for new O.S
Disabled: No Support ACPI function.You can only change the content of Doze Mode, Standby Mode, and Suspend Mode when the Power Management is set to ‘User Define’.
Power Management: Use this to select your Power Management selection. The default is User define.
Disabled: The system operates in NORMAL conditions (Non-GREEN), and the Power Management function is disabled.
Max. saving: Maximum power savings. Inactivity period is 1 minute in each mode.
Page
