BIOS
Doze Mode: The “Doze” mode timer starts to count when no “PM events” have occurred.
Suspend Mode: This function works only when the Pentium II Processor is installed. The timer starts to count when “System Standby” mode timer is timed out and no “PM Events” are occurring. Valid range is from 1 minute up to 1 hour.
HDD Power Down: HDD Standby timer can be set from 1 to 15 minute(s).
Instant Off: Turns off instantly.
Delay 4 Second: Turns off after a 4 second delay. If momentary press of button, the system will go into Suspend Mode. Press again to take system out of Suspend Mode.
PWRON After
ON: System always power on after a power interrupte.
OFF: System always stay off after a power interrupte.
VGA: When set to On (default), any event occurring at a VGA port will awaken a system which has been powered down.
LPT & COM: When set to On (default), any event occurring at a COM(serial)/ LPT (printer) port will awaken a system which has been powered down.
HDD & FDD: When set to On (default), any event occurring at a hard or floppy drive port will awaken a system which has been powered down.
DMA/master: When set to On (default), any event occurring to the DMA control- ler will awaken a system which has been powered down.
RTC Alarm Resume: When set to Enable rta alarm resume, you could set the date (of month) and timer (hh:mm:ss), any event occurring at will awaken a system which has been powered down.
Page
