Compaq 60002MC10, 370, PC100 specifications Shield Connector, Power-On/Off Remote

Introduction

I/O Shield Connector

The board is equipped with an I/O back panel.Please use the appropriate I/O shield (figure 3).

	parallel port		Joystick/Midi
PS/2 Mouse	USB port
PS/2
KEYBOARD	COM1	VGA1
			Speaker
		Figure 3		Line_in

Power-On/Off (Remote)

MIC

The board has a single 20-pin connector for ATX power supplies. For ATX power supplies that support the Remote On/Off feature, this should be connected to the systems front panel for system Power On/Off button. The systems power On/Off button should be a momentary button that is normally open.

The board has been designed with “Soft Off" functions. You can turn Off the system from one of two sources: The first is the front panel Power On/Off button, and the other is the "Soft Off" function (coming from the onboard circuit controller) that can be controlled by the operating system such asWindows® 95/ 98/SE/ME or Windows®2000.

ATX

POWER SUPPLY

J3	Case (chassis) Power	Figure 4: Simple ATX Power
	ON/OFF button	ON/OFF Controller

Page 1-3