Chapter 2 Introduction

HP PCL-II Emulation Default Settings

The factory settings for the PCL-II emulation menu options are shown in Table 1. Host control codes can override the settings for these menu options.

Table 1. PCL-II Menu Option Factory Settings

Parameter

Default Setting

 

 

 

 

Primary/Secondary Character Set

 

ID

0

Symbol Set

Roman-8(8U)

Pitch

10.0 cpi

Density

Data Processing

Page Length Representation

Inches/Page

Graphics Density

60 dpi

Perforation Skip

Disable

Display Functions

Disable

LF after CR

Disable

CR after LF

Enable

CR after FF

Enable

CR after VT

Enable

PTX Linefeed

Disable

LPI Adjust

6 LPI

Page L. /Lines

66 lines

Page L. /Inches

11 Inches

 

 

Switching Between the Emulations

The printer supports four emulations: PCL-II (the default), LinePrinter Plus, Code V™ and IGP ®/PGL®. The LinePrinter Plus has three protocols from which to choose: P-Series, Proprinter III XL, and Epson FX-1050.

You can switch between PCL-II and any of the LinePrinter Plus protocols by sending one of the following commands:

ESC%-00000X Switches from PCL-II to P-Series

ESC%-00001X Switches from PCL-II to Proprinter III XL

ESC%-00002X Switches from PCL-II to Epson FX-1050

SFCC};K0 Switches from any of the LinePrinter Plus emulations to PCL-II

12

Page 12
Image 12
Compaq 5525B/31/32 manual HP PCL-II Emulation Default Settings, Switching Between the Emulations