Chapter 2 Configuring the PCL-II Emulation with Control Codes

CODE 3 OF 9

A variable-length data string of up to 32 ASCII characters may be printed using the Code 3 of 9 bar code. The string may be an odd or even length and may use any of the standard characters (specified in MIL-STD-1189). If a non-valid character is used in the string, a blank non-readable bar code will be printed; non-valid characters are not substituted or deleted. The width of the printed bar code can be approximated by the following equation:

Width in inches = (number of characters)/3.14 + 0.50

INDUSTRIAL 2 OF 5

A variable-length data string of up to 32 ASCII characters may be printed using the Industrial 2 of 5 bar code. The string may be an odd or even length and may use any character from 0 through 9. If a non-valid character is used in the string, a blank non-readable bar code will be printed; non-valid characters are not substituted or deleted. Optional checksums are not inserted in the bar code. The width of the printed bar code can be approximated by the following equation:

Width in inches = (number of characters)/3.7 + 0.38

INTERLEAVED 2 OF 5

A variable-length data string of up to 32 ASCII characters may be printed using the Interleaved 2 of 5 bar code. The string may be an odd or even length. However, if the string is an odd length, a leading zero will be inserted to make a string of an even length. Valid data characters are 0 through 9. If a non-valid character is used in the string, a blank non-readable bar code will be printed; non-valid characters are not substituted or deleted. Optional checksums are not inserted in the bar code. The width of the printed bar code can be approximated by the following equation:

Width in inches = (even number of characters)/6.25 + 0.15

UPCA

A fixed-length data string of 11 ASCII characters may be printed using the UPC A bar code. The string must have a length of 11 and may use any of the standard characters 0 through 9. If a non-valid character or string length is used, a blank non-readable bar code will be printed; non-valid characters are not substituted or deleted. The width of the printed bar code does not vary and is 1.56 inches.

UPCE

A fixed-length data string of 11 ASCII characters may be printed using the UPC E bar code. The string length must be 11 and may use any of the standard characters 0 through 9 (however, the data pattern must meet the format of UPC E bar codes; UPC E is a shortened version of very specific patterns printable with UPC A). If a non-valid character or string length is used, a blank non-readable bar code will be printed; non-valid characters are not substituted or deleted. For UPC E, a zero (0) is required in the first position of the bar code data (the number system character). The width of the printed bar code is not variable and is 0.81 inches.

48

Page 48
Image 48
Compaq 5525B/31/32 manual Code 3