Chapter 2 Configuring the PCL-II Emulation with Control Codes

Programmable Reset

The programmable reset escape sequence (ESCE) causes the printer to eject paper to the top-of-form (position 0,0) if not already at top-of-form. This command resets all current printer configuration values to the following states. The printer remains on-line after a programmable reset. When the printer is reset, it is set to a known state as follows:

Primary and secondary character sets (fonts) as configured from the control panel.

Vertical line spacing (6/8 LPI) as configured from the control panel.

Paper moves to the next Top of Form position (if not currently at Top of Form).

Data buffer is printed and then the buffer is cleared.

Standard VFC channel assignments selected as defined by physical page length.

Margins set at maximum limits and/or Left margin set at first column (0).

Physical page length remains as configured from the control panel.

Logical page length = physical page length

Text length = logical page length minus one inch

All character font attributes (symbol set, pitch, style, and density) default to the character font configured from the control panel.

Display functions off and Underline enhance disabled.

Perforation skip mode as configured from the control panel.

Enable/Disable Label Card as configured from control panel.

Printronix linefeed emulation as configured from control panel.

Raster graphics horizontal resolution as configured from the control panel. Vertical resolution set to 72 dots per inch.

18

Page 18
Image 18
Compaq 5525B/31/32 manual Programmable Reset