Compaq 740 manual Speaker Installation

Models: 740

1 73
Download 73 pages 45.03 Kb
Page 7
Image 7
Speaker Installation

6.Connect the power cord to the back of the monitor 3a, then connect the power cord to a power outlet 5.

WARNING: To reduce the risk of electric shock or damage to your equipment, do not disable the power cord grounding feature. This equipment is designed to be connected to a grounded (earthed) power outlet that is easily accessible to the operator. The grounding plug is an important safety feature.

WARNING: For your safety, be sure that the power outlet you plug your power cord into is easily accessible and located as close to the equipment operator as possible. When you need to disconnect power to the equipment, unplug the power cord from the power outlet by grasping the plug firmly. Never pull on the cord.

CAUTION: For the protection of your monitor as well as your computer, connect all power cords for your computer and its peripheral devices (monitor, printer, scanner, and so on) to some form of surge protection such as a power strip or UPS (Uninterruptible Power Supply). Not all power strips provide surge protection; they must be specifically labeled as having this ability. Look for manufacturers that have a Damage Replacement Policy to replace your equipment if their surge protection fails.

7.Install your speakers using one of the methods listed in “Speaker Installation.”

8.Power on your monitor by pressing the power button 7. Power on the speakers by pressing the power button on the side of the right speaker.

If necessary, adjust the front panel controls according to your personal preference.

Your monitor installation is now complete.

Speaker Installation

Headphone/Audio Input Jacks

Retractable Speaker Mechanism

Speaker Stand

Insert the headphone connector

1.

Rotate the thumbwheel up to extend

Insert the speaker stand into the slot on

(headphones not included) into the

 

the hook mechanism.

the rear of each speaker.

headphone jack.

2.

Align the hooks with the slots on the

 

 

 

Insert one end of the cable from

 

monitor, then gently insert the hooks

 

 

into the slots and slide down to lock in

 

your portable audio device (not

 

 

 

place.

 

included) into the speaker.

 

 

 

 

 

 

 

 

 

5

Page 7
Image 7
Compaq 740 manual Speaker Installation