Compaq 800 manual Using Battery Power, Connecting and Removing the Battery

Warning

Your Notebook contains a lithium-ion battery pack. Improper handling of the battery pack can result in fire and chemical burns. Do not disassemble, crush, puncture, short external contacts, dispose of in water or fire, or expose it to temperatures higher than

140°F (60 °C). Replace only with the Compaq battery pack specified for your Notebook.

See also

“Components on Underside” in Chapter 2 of this guide for help in locating the Battery Stopper and Battery Release Switch.

See also

“Caring for Your Battery” later in this guide.

Using Battery Power

Connecting and Removing the Battery

To connect the battery to your Notebook, place your Notebook upside down and position the battery so that the side with the label is turned down. Unlock the Battery Stopper first. Connect the battery to your Notebook until it snaps into place. Then lock the Battery Stopper.

To remove the battery, complete the following steps:

1.Save your files.

2.If the AC adapter is not connected, turn off your Notebook.

3.Unlock the Battery Stopper.

4.Slide and hold the Battery Release Switch on the underside of your Notebook to the back.

5.Pull the battery out.

3-4 USING YOUR NOTEBOOK	PRESARIO MOBILE INTERNET PC BEYOND SETUP GUIDE
	800 SERIES