Compaq 800 manual Manually Ejecting a Disc

Manually Ejecting a Disc

If you need to eject a disc when the power is off, complete the following steps to eject the disc manually:

1.Make sure the power is off and any external power sources are disconnected.

2.Insert a small rod or pin, such as a paper clip (approximately 1/16 inch in diameter and at least 3/8 inch in length) into the Manual Eject Hole and push firmly as shown in the figure above.

3.Remove the disc from the tray.

4.Gently push the tray back into the drive until it locks into place.

5-4 USING THE CD OR DVD DRIVE	PRESARIO MOBILE INTERNET PC BEYOND SETUP GUIDE
	800 SERIES