Compaq AAPG9DKTE manual Installation Procedure on Windows Operating Systems

6

Installing TP Desktop Connector Software on Windows Operating Systems

This chapter describes the procedures for installing or reinstalling the Compaq TP Desktop Connector software from the TPware Product Suite CD running on a Windows system and also contains information on postinstallation tasks on Windows systems.

For information on installing TP Desktop Connector software on non-Windows platforms, see Chapter 7.

For information on installing TP Desktop Connector Gateway for ACMS software, see Part III of this guide (Chapters 8 through 11).

6.1 Installation Procedure on Windows Operating Systems

To install TP Desktop Connector software, run the setup program. If you install from the TPware Product Suite CD, the program is provided on the CD-ROM (see Chapter 4). Double-click the following:

E:\intel32\setup.exe

Replace E: with the correct drive letter for your system.

If you install from the Software Products Library CD, run the setup program from the directory in which you expanded the archive file that you copied from the OpenVMS system (see Section 3.2.2.1).

The setup program displays a splash screen and a progress indicator while it initializes its wizard. When setup starts, you see a series of dialog boxes. The following table lists the operations associated with the command buttons in the dialog boxes.

Installing TP Desktop Connector Software on Windows Operating Systems 6–1