Compaq AAPG9DKTE manual Software Prerequisites, Resources, For this platform See

2.Execute it

3.Set up your system for the TPware environment

4.Set up the client services for your network transport

5.Transfer and execute a sample client archive

6.Run the sample to verify that the installation functions properly.

Sections 7.1.1 through 7.1.3 discuss the prerequisites and requirements necessary before installing the TP Desktop Connector client services and sample files. Installation instructions are organized by platform:

For this platform	See . . .
Compaq OpenVMS systems	Section 7.2
Tru64 UNIX systems	Section 7.3

7.1.1 Software Prerequisites

The TP Desktop Connector Software Product Description (SPD) contains information on software prerequisites for installing TP Desktop Connector software.

7.1.2 Disk Space

Table 5–1 lists the disk space required for each of the desktop systems.

7.1.3 Resources

Before you start the installation procedure, obtain the following:

•DECnet node name (host name on TCP/IP) for the OpenVMS system on which the TP Desktop Connector Gateway for ACMS is installed

•Valid account (user name and password) on the OpenVMS system on which the TP Desktop Connector Gateway for ACMS is installed

•Directory of the network file transfer software in your directory search path or on your CD-ROM

•Directory in which the TPware files reside on an OpenVMS system, or your CD-ROM device (usually E:\)

•Directory in which to install the client services software

•Sufficient disk space, as shown in Table 5–1

•Host name for TCP/IP

7–2Installing the TP Desktop Connector Client Services on Non-Windows Systems