Removal and Replacement Procedures
1.Prepare the computer for disassembly (Section 5.3) and remove the following components:
❏Hard drive (Section 5.4)
❏Optical drive (Section 5.8)
❏Switch cover (Section 5.9)
❏Keyboard (Section 5.10)
❏Display assembly (Section 5.11)
❏Base enclosoure (Section 5.12)
❏
❏Speaker assembly (Section 5.15)
2.Turn the top cover right side up with the front toward you.
3.Release the ZIF connector 1 to which the TouchPad cable is connected and disconnect the cable 2 from the system board.
Disconnecting the TouchPad Cable
Maintenance and Service Guide |