Removal and Replacement Procedures
✎The wireless antenna transceivers and cables are included with the display enclosure, spare part number
29.If it is necessary to replace the wireless transceivers and cables, remove the two Phillips PM2.0×3.0 screws 1 that secure the left and right transceivers to the display enclosure.
30.Release the retention tabs 2 built in to the display enclosure lining that secure the wireless antenna cables to the display enclosure.
31.Detach the wireless antenna transceivers 3 from the display enclosure.
32.Remove the wireless antenna transceivers and cables 4.
Removing the Wireless Antenna Transceivers and Cables
Reverse the above procedure to reassemble and install the display assembly
Maintenance and Service Guide |
