![](/images/new-backgrounds/1184638/184638179x1.webp)
Removal and Replacement Procedures
Disassembly Sequence Chart (Continued)
Section | Description | # of Screws Removed |
|
|
|
5.11 | Display Assembly | 4 |
| Display bezel | 6 |
| Display release hooks | 4 |
| Display inverter | 1 |
| Display hinge covers | 4 |
| Display panel | 2 |
| Display hinges | 4 |
| Wireless antenna transceivers | 4 |
|
|
|
5.12 | Base Enclosure | 18 |
|
|
|
5.13 | 2 | |
|
|
|
5.14 | Bluetooth Module | 2 |
|
|
|
5.15 | Speaker Assembly | 0 |
|
|
|
5.16 | RTC Battery | 0 |
|
|
|
5.17 | Fan/Heat Sink Assembly | 4 loosened |
|
|
|
5.18 | Processor | 1 loosened |
|
|
|
5.19 | System Board | 3 |
|
|
|
5.20 | LED Board | 2 |
|
|
|
5.21 | ExpressCard Assembly | 2 |
|
|
|
5.3Preparing the Computer for Disassembly
Before you begin any removal or installation procedures:
1.Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system.
2.Disconnect all external devices connected to the computer.
3.Disconnect the power cord.
Maintenance and Service Guide |