Removal and replacement procedures
5.Remove the four Torx T8M2.0×6.0 screws 1 that secure the display assembly to the computer. Be sure to hold the display before removing the last screw to prevent damage to the display.
6.Lift the display assembly 2 straight up and remove it.
Perform the following steps in sequence to remove or replace the display bezel or the display assembly internal components.
1.To remove the display bezel:
a.Remove the two rubber screw covers 1 at the bottom of the display assembly and peel back the two rubber bumper strips 2 at the top of the display assembly.
Maintenance and Service Guide |
