Removal and replacement procedures
b.Remove the two PM2.0×5.0 screws 1 and two PM3.0×6.0 2 screws that secure the display bezel to the display enclosure.
c.Lift the inside edge of the left and right sides 1 to disengage it from the clips, and then the top and bottom sides 2 of the display bezel until the bezel disengages from the display enclosure.
d.Remove the display bezel 3. The display bezel is available using spare part number
Reverse this procedure to install the display bezel. Be careful to route the cables through the side openings in the hinge covers and avoid pinching the cables between the bezel and display enclosure.
Maintenance and Service Guide |
