Compaq DIGITAL Server Cluster Kits for Windows NT Ready-to-Go Cluster Components, ∙ Tape drives

42

Ready-to-Go Cluster Components

Although there are several Ready-to-Go Cluster configurations available, the following example lists the components of the Ready-to-Go Cluster using the 7305.

The DIGITAL Server 7305HA is a H9A10 white cabinet 1.70m high (34U) dual AC-In Power Distribution Unit containing:

∙Two 7305R DIGITAL Servers each with:

−One 64-bit Alpha EV5.6 533Mhz with 4MB cache

−Integrated S3 Trio SVGA graphic controller with 1MB VRAM

−One CDROM drive

−One 1.44MB Diskette drive

−One 4.3GB UltraWide SCSI disk

−One 100Mb/s Ethernet Adapter for Cluster communication

−One 100Mb/s Ethernet Adapter for LAN Network Connection

−One two-channel UltraWide SCSI Single Ended adapter

−One one-channel UltraWide SCSI Differential adapter

−One 128MB ECC EDO RAM option (4 x 32MB DIMM)

−Two 450W power supply

∙One RA7000 RAID Array with:

−One HSZ70 controller with 64MB cache and 24 SBB Slots

−Two AC-In modules

−One Environment Module

−Eight 180W power supplies

−One 4.3GB UltraWide SCSI disk

Components NOT included in the Ready-to-Go Clusters

The following components are not included in the Ready-to-Go Clusters:

∙Tape drives

Tapes drives must be ordered separately.

∙Servers disk drives

Servers contain only one 4GB drive. Additional drives must be ordered separately.

∙RAID Subsystem disk drives

RAID Subsystem contains only one 4.3GB drive. Additional drives must be ordered separately.

Note: The drives for servers and RAID subsystems are different.

You can also order Ready-to-Go Clusters with the following options:

∙Console Switch

∙Additional Shelves

∙Additional Raid Shelves

DIGITAL Server Cluster Kits for Windows NT Configuration Guide