Compaq F500 manual Computer feet, Memory module

Computer feet

Description	Spare part number
Rubber Feet Kit (includes 4 base enclosure rubber feet)	431431-001

The computer feet are adhesive-backed rubber pads. The feet attach to the base enclosure in the locations shown below.

Memory module

Description	Spare part number
1024-MB (PC2-4200, 533-MHz, 1-DIMM)	443489-001
512-MB (PC2-5300, 667-MHz, 1-DIMM)	428879-001

Before removing the memory module, follow these steps:

1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system.

2. Disconnect all external devices connected to the computer.

3. Disconnect the power cord.

4. Remove the battery (see Battery on page 28).

Remove the memory module:

1. Position the computer with the front toward you.

2. Loosen the three Phillips PM2.0×5.0 screws (1) that secure the memory module compartment cover to the computer.

Component replacement procedures 31