Installation
2.4 Unpacking
The cabinet is shipped on a wooden pallet. Proceed as follows to unpack the cabinet:
1.Position the pallet with the cabinet in an area that provides sufficient workspace for unpacking. Ensure that there is sufficient clearance in front of the pallet (marked with a large F) to roll the cabinet down the ramps.
2.Refer to Figure
3.Remove the corner posts öand the carton õfrom the pallet ú.
_________________________ Caution ___________________________
In the next step, take care not to damage the cabinet finish when removing the shrinkwrap.
____________________________________________________________
4.Remove the plastic bag ùcovering the cabinet.
5.Check the cabinet and the associated equipment for any external damage. Report any damage to Compaq Customer Service or a Compaq sales office and to the responsible freight carrier.
__________________________ Note _____________________________
Keep all packing material and receipts in case a damage claim is filed.
____________________________________________________________
H9A11 Cabinet Installation/Owner's Guide
