Installation

2.5.1 Removing and Replacing the Rear Lift-Off Door

The rear lift-off door provides access into the rear of the cabinet. To remove the rear lift-off door, refer to Figure 2-4 and proceed as follows:

Removal

1.Remove the two Phillips-head screws ôthat secure the rear lift-off door to the two brackets úat the top rear of the cabinet.

2.Grasp both sides of the rear lift-off door about midway up the door. Then lift the door up until the securing tabs öon the rear lift-off door come out of the tab catches õon the cabinet.

3.Lift the door off and away from the cabinet.

4.Place the rear lift-off door aside and out of the way.

Replacement

To replace the rear lift-off door, reverse the removal procedure, steps 1 through 4.

2–10H9A11 Cabinet Installation/Owner's Guide

Page 22
Image 22
Compaq H9A11 manual Removing and Replacing the Rear Lift-Off Door, Removal