Compaq H9A11 manual Introduction, Tools Required, Site Planning

2

Installation

2.1 Introduction

This chapter provides the following information:

∙Tools Required (Section 2.2)

∙Site Planning (Section 2.3)

∙Unpacking (Section 2.4)

∙Installation Procedures (Section 2.5)

2.2Tools Required

The tools needed to install the H9A11 Cabinet are:

∙Utility knife

∙Phillips screwdriver

∙5/8-inch box wrench or adjustable wrench

2.3Site Planning

The cabinet requires a space of 60.0 cm (23.60 in.) by 86.0 cm (33.86 in.). In addition, the cabinet requires a clearance of 91.44 cm (36.00 in.) at both the front and rear of the cabinet for service. This may be greater depending on the distance that a system may be slid out of the cabinet.

H9A11 Cabinet Installation/Owner's Guide 2–1