Installation
6.Refer to Figure
__________________________ Note _____________________________
The ramps attach to the front of the pallet. Therefore, the cabinet will have to be rolled frontwards down the ramps.
____________________________________________________________
7.Remove the ramps °from the shipping carton and set the ramps in the holes ¢ provided at the front of the pallet ú. Ensure that the arrows èon the ramps match the pallet arrows êas shown in Figure
_________________________ Caution ___________________________
In the next step, the leveler feet must be fully retracted to prevent contact with the ramp or the floor when the cabinet is unloaded from the pallet.
____________________________________________________________
8.Adjust the four cabinet leveler feet †and the leveler foot on the stabilizer bar ëto the maximum upward position.
H9A11 Cabinet Installation/Owner's Guide
