Installing the M110
Mounting the Slide Rails
To mount the slide rails on the Omvia Media Server Rack 100, follow these steps:
1Find the location on the mounting rail where the M110 is to be installed.
2Install the cage nuts as follows:
aOn the front of the Rack 100, install a #10 cage nut in the middle position on the mounting rail on each side. Install two M6 cage nuts in the remaining positions on both sides.
Note The middle cage nut position must be between two wide spaces on the mounting rail.
Narrow space
Wide space
Middle cage nut position
Wide space
Narrow space
bOn the back of the Rack 100, install M6 cage nuts on the mounting rail in all positions (three on each side).
3Mount the slide rails to the mounting rail of the Rack 100 using the screws provided.
Note The slide rails are marked L (left) and R (right).
60001024, Third Edition | Installing the Omvia Media Server M110 |
