Installation
Overview
2.1Overview
This chapter gives detailed information about installing the NetPorty II hardware and about the necessary software drivers which make NetPorty II access possible.
The NetPorty II is delivered with access driver and applications for Windows 95 and Windows NT. To get your NetPorty II operational follow the installation guide lines.
2.2Installing the Hardware
To install the hardware you should connect the NetPorty II to the serial or to the parallel port of your PC.
If the NetPorty II operates at the serial port of the PC the adapter cable will be used to get the right signals. Plug in the 25 pin
The NetPorty II can operate at the parallel port which must be configured as EPP1 (V1.7 or V1.9) mode. ECP2.mode is not supported.
Make sure that the right interrupts are used in the systems configuration and the BIOS settings.
1EPP: Enhanced Parallel Port
2ECP: Extended Capabilities Port
Version 1.03
