4. Enter the client name, for example: client01. Yousee a prompt
similar to the following:
Select the remote installation environment:
1) /var/adm/ris/ris10.alpha
’Tru64 UNIX V5.1 Operating System ( Rev nnn )’
2) /var/adm/ris/ris11.alpha
’Tru64 UNIX V5.1A Operating System ( Rev nnn )’
Enter your choice or press RETURN to quit:
5. Enter the number of the RIS environment you want, for example: 2.
Yousee a prompt similarto the following:
Select one or more products for the client to install
from /var/adm/ris/ris11.alpha:
Product Description
1’Tru64 UNIX V5.1A Operating System ( Rev nnn )’
Enter one or more choices as a space-separated list
(for example, 1 2 3) or "all" for all products [all]:
6. Enter the numbers ofthe products you want to install, or press Return
for all products. You see a prompt similar to the following:
You chose the following products:
1’Tru64 UNIX V5.1A Operating System ( Rev nnn )’
Is that correct? (y/n) [y]:
7. Enter yto verify your selection. You see a prompt similar to the
following:
Network type:
1) Ethernet or FDDI
2) Token Ring
Enter your choice
8. Enter your network type, for example: 1 to select Ethernet. After
selecting the network type, you will see a prompt similar to the
following:
Is this client a cluster alias? (y/n) [n]:
9. Enter yor nto specify whether the client is or is not a cluster alias. For
example, if you select y, RIS does not need to get a hardware (ethernet)
address for the client. If you select n, then you will see a promptsimilar
to the following:
Enter the client processor’s hardware network address. For
example, 08-00-2b-02-67-e1 [xx-xx-xx-xx-xx-xx]:
6–8 Managing RIS Clients and Environments